Industrial Reducers
The Series G gearbox from Radicon is available in Parallel Shaft helical units and right angle shaft Bevel/Helical units whilst the Series H is available in In-Line and right angle units. Both units come in double triple and quadruple reduction.
Table of Contents
Series G
Up to – 1,860kW / 165,000 Nm
more info
The modular design and construction of the Series G offers many engineering and performance benefits including a high degree of interchangeability of parts and sub assemblies. This in turn provides considerable economies of production whilst maintaining the highest standard of component integrity.
Adding to the range of power transmission geared motors this product takes advantage of our many years of accumulated design expertise together with the use of high quality materials and components. The end result is a series of speed reducing gear units offering high load carrying capacities, increased efficiency, quiet running and reliability.
The Range Includes:
- 8 sizes of units with a ratio coverage of 6.3:1 to 315:1
- Parallel shaft helical units and Right angle bevel/helical units
Design Features Include:
Profile ground helical gears / hard finished spiral bevel gears.
High level of surface finish for quiet running.
Units can be offered in horizontal mounting positions or alternatively vertical mounting.
Specially designed units are available for heavy duty agitator or tower applications.
All units are also available with a hollow bore for output shaft mounting. Output bores are connected by a shrink disc or can be supplied with a keyed sleeve.
Backstops can be fitted to all Series G units when required to operate in non-reversing drives.
As improvements in design are being made continually this specification is not to be regarded as binding in detail and drawings and capacities are subject to alteration without notice. Certified drawings will be sent on request.
Series H
Industrial Gearbox
more info...
The modular design and construction of the Series H offers many engineering and performance benefits including a high degree of interchangeability of parts and sub assemblies. This in turn provides considerable economies of production whilst maintaining the highest standard of component integrity.
The Range Includes:
- 11 sizes of units with a ratio coverage of 1.22:1 to 130:1
- Series H gear units are fully metric
- Shaft extensions are to BS 4506 : 1970 (1991)-ISOR775
- Output shaft bores are to BS EN 20286-1 : 1993, ISO 286-1 : 1988
- Pulling down bolt holes are to BS EN 20273 : 1992, ISO R273, medium fit series
Design Features Include:
Profile ground helical gears.
High level of surface finish for quiet running.
Units can be offered in horizontal mounting positions or alternatively vertical mounting.
Specially designed units are available for cooling tower applications or heavy duty stirrer applications.
All units are also available with hollow bore for output shaft mounting. Output bores can be connected by shrink disc.
As improvements in design are being made continually this specification is not to be regarded as binding in detail and drawings and capacities are subject to alteration without notice. Certified drawings will be sent on request.
