Cone Ring couplings offer vastly improved torsional flexibility with a limited freedom of axial movement because of their series of rubber ‘conical section’ rings. Types 611, 613, are available with bore sizes up to 170mm diameter and a basic rated torque up to 23500 Nm. They accommodate all types of shaft misalignment met in normal operation, being a development of the old pin and bush design that it resembles in its simplicity and ease of...

Series F shaft mounted geared motors offer ratios from 5 to 100/1 in double reduction, from 100 to 360 in triple and up to 5600/1 in combined reductions. Motors are available up to 110 kW giving a maximum output torque of 16500 Nm. The series F geared motor is primarily designed as a shaft mounted unit incorporating an integral torque reaction bracket. The units are also available with rubber torque bushes, output flanges, output shafts and...

Single Reduction Units (worm) This fully metric range of units of 100, 125, 160 and 200 mm centres is based on a single universal case for each size, giving a high degree of common parts and interchangeability. Under-driven, over-driven and vertical types provide a choice of shaft arrangements in meeting the requirements of a wide variety of applications in the medium power range up to 140 kW. All units are designed with hollow output bore,...

Series K right angle drive helical bevel helical geared motors offer ratios from 8 : 1 to 160 : 1 in three stages or up to 10,000 : 1 in five stages and 36,000 : 1 in 6 stages. Motors are available up to 90kW and output torque capacity up to 12,300Nm. The Series K geared motor is designed with integral cast feet for base or end mounting and can be offered with single or double extended output shafts. Units are also available shaft mounted or...

WEG W22 Cast Iron Single Phase Motor High starting torque. Suitable for domestic and rural power supply conditions. Adaptable design suitable for a variety of applications and needs. Available from stock at Industrial Motors and Gears. Standard Rated output: 0,18 kW up to 9,2 kW Number of poles: 2 and 4 Frame sizes: 63 up to 132M/L Voltage: 230 V or 230/460 V Frequency: 50 Hz Degree of protection: IP55 Painting plan: 207A Frame material: Cast...

The Radicon range of Elign gear couplings are ideally suited to accommodate Radial, Angular and combined Radial and Angular misalignment, whilst also permitting axial movement of the shaft.   The Elign gear coupling range is first and foremost dependable and provides quality efficient operation in high torque applications. The gear couplings dependability can be counted in the most testing of conditions.   The ELIGN gear coupling is a...